E-Flite EFlite 25A Brushless ESC for RC Airplane Helicopter

Detailed Product Description

E-Flite EFlite 25A Brushless ESC for RC Airplane Helicopter

25-Amp Pro Brushless ESC featuring Advance Programming and Heat Sinks with pre-wired EC3 Connector and battery input and 3.5mm female gold bullets on motor output leads.

Product Features

• Up to 25 amps continuous current with proper air flow
• Finned heat sinks for both the motor drive mosfets and dual BEC regulators to support up to 4 sub-micro servos
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cut-off with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
• Programmable throttle input range (1.1ms-1.9ms or Auto Select)
• Auto motor shut down if signal is lost or there is interference
• Programmable timing - 2 user selectable ranges for use with a large variety of brushless motors
• Pre-wired connectors - E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
• Soft start

Overview

This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2-3 cell Li-Po battery packs and up to four sub-micro servos. The ESC features a lightweight plastic case, with exposed, finned heat sinks for both the motor drive mosfets, and unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.

Specifications

Brake: Yes - Programmable
Continuous Maximum Current: 25A
Input Connector Types: 16 AWG with E-flite EC3 Connector
Output Connector Types: 16 AWG with 3.5mm Female Gold Bullet Connectors
Momentary Peak Current: 30A (15 sec)
Dimensions (WxLxH): 28x48x11 mm (1.1x1.9x.4 in)
Weight: 32g (1.2 oz)
Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd