Corona 2.4GHz JR DSSS V2 TX Module & 8CH Receiver RX

Detailed Product Description

Corona 2.4GHz JR DSSS V2 TX Module & 8CH Receiver RX

The Corona 2.4Ghz system replaces the standard JR module on most JR PPM systems equipped with an FM module.

If you want to upgrade your transmitter to 2.4Ghz, this module is exactly for you are looking for! This 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years.

Direct Sequence Spread Spectrum (DSSS) uses a carrier that remains fixed to a specific frequency band. The data signal, rather than being transmitted on a narrow band as is done in microwave communications, is spread onto a much larger range of frequencies (RF bandwidth) using a specific encoding scheme. This encoding scheme is known as a Pseudo-noise sequence, or PN sequence.

The 2.4G system has made digital communication come true and sends an error free signal to the receiver which is decoded faster than ever before.

Features

• Corona 2.4GHz JR DSSS V2 TX Module & 8CH Receiver RX

• Extended operation range of 1.5Km range with has been tested in the real flying environment.

• A 5dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal

• One key user friendly set up mode.

• The unique receiver design makes the Corona modules easy to be installed and ensures reliability

• Corona's advance needle design ensures the lightest signal receiver.

*Please take note of the Rx and Tx versions. V1 and V2 are not compatible.

Specifications: Receiver

• Type: 2.4G DSSS

• Size: 46mm*25mm*16mm

• Channel: 8

• Voltage : 4.8 V - 6V

• Range : more than 2100m

• Resolution: 10bit

• Operating current : 30 MA

• Sensitivity : 100dbm

• Latency : 22ms

Package Contents

• Corona 2.4GHz JR DSSS V2 TX Module

• Antenna

• 2.4Ghz 8CH V2 Receiver RX (CR8D)